Replacing A Single Tag - Huawei Quidway S9300 Configuration Manual

4 VLAN Mapping Configuration

4.5.2 Replacing a Single Tag

Context
Do as follows as the S9300 that needs to replace a single tag of packets.
Procedure
l
4-8
Applying a traffic policy in the inbound direction of an interface
1. Run:
system-view
The system view is displayed.
2. Run:
traffic classifier name1
A traffic classifier is created and the traffic classifier view is displayed.
3. Run:
if-match vlan-id vlan-id1
The packet matching rule, that is, the original VLAN ID of packets matching the
classifier, is set.
4. Run:
quit
Return to the system view.
5. Run:
traffic behavior name1
A traffic behavior is created and the traffic behavior view is displayed.
6. Run:
remark vlan-id vlan-id2
The S9300 is configured to replace the original VLAN ID of the packets matching the
traffic classifier with the specified VLAN ID.
7. Run:
quit
Return to the system view.
8. Run:
traffic policy name1
A traffic policy is created and the policy view is displayed.
9. Run:
classifier name1 behavior name1
The traffic classifier is bound to the traffic behavior in the traffic policy.
10. Run:
quit
Return to the system view.
11. Run:
interface interface-type interface-number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)