Creating A Super-Vlan - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port link-type access
The link type of the interface is set to access.
Step 4 Run:
quit
Return to the system view.
Step 5 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
Step 6 Run:
port interface-type { interface-number1 [ to interface-number2 ] } &<1-10>
The interfaces are added to the VLAN.
----End

3.6.3 Creating a Super-VLAN

Context
Do as follows on the S9300 where you need to configure VLAN aggregation.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
Step 3 Run:
aggregate-vlan
The created VLAN is configured as a super-VLAN.
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 VLAN Configuration
3-19