Huawei Quidway S9300 Configuration Manual page 269

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
l
l
Procedure
Step 1 Enable spanning tree calculation on the CE and PE devices.
# Configure CE1.
[CE1] stp enable
# Configure CE2.
[CE2] stp enable
# Configure CE3.
[CE3] stp enable
# Configure CE4.
[CE4] stp enable
# Configure PE1.
[PE1] stp enable
# Configure PE2.
[PE2] stp enable
Step 2 Configure the PE devices to change the destination MAC address of the BPDUs sent by the CE
devices.
# Configure PE1.
[PE1] bpdu-tunnel stp group-mac 0100-5e00-0011
# Configure PE2.
[PE2] bpdu-tunnel stp group-mac 0100-5e00-0011
Step 3 Add GE 1/0/0 to VLAN 100 and add GE 1/0/1 to VLAN 200 on PE1 and PE2. Enable the BPDU
tunnel function on PE1 and PE2.
# Configure PE1.
[PE1] vlan 100
[PE1-vlan100] quit
[PE1] interface GigabitEthernet 1/0/0
[PE1-GigabitEthernet1/0/0] port hybrid pvid vlan 100
[PE1-GigabitEthernet1/0/0] port hybrid untagged vlan 100
[PE1-GigabitEthernet1/0/0] quit
[PE1] vlan 200
[PE1-vlan200] quit
[PE1] interface GigabitEthernet 1/0/1
[PE1-GigabitEthernet1/0/1] port hybrid pvid vlan 200
[PE1-GigabitEthernet1/0/1] port hybrid untagged vlan 200
[PE1-GigabitEthernet1/0/1] quit
[PE1] interface gigabitethernet 1/0/0
[PE1-GigabitEthernet1/0/0] stp disable
[PE1-GigabitEthernet1/0/0] bpdu-tunnel enable
[PE1-GigabitEthernet1/0/0] quit
[PE1] interface gigabitethernet 1/0/1
[PE1-GigabitEthernet1/0/1] stp disable
Issue 03 (2009-08-20)
VLAN IDs of the PE interfaces at the CE side
IDs of VLANs whose BPDUs are allowed to pass through the PE interfaces at the PSN
side
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 BPDU Tunnel Configuration
9-33