Qinq Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
About This Chapter
This chapter describes the basic knowledge, methods, and examples for configuring QinQ.
5.1 Concept of QinQ
This section describes the concept of QinQ.
5.2 QinQ Features Supported by the S9300
This section describes the QinQ features supported by the S9300.
5.3 Configuring QinQ on an Interface
This section describes how to configure the interface type, the protocol used by the outer VLAN
tag, and the interface-based QinQ.
5.4 Configuring Selective QinQ
This section describes how to configure the interface type, the outer VLAN ID, and selective
QinQ.
5.5 Configuring Flow-based Selective QinQ
This section describes how to set the interface type, the packet matching rule, the outer VLAN
tag added to received packets, and enable the traffic policy to implement flow-based selective
QinQ.
5.6 Setting the Protocol Type in the Outer VLAN Tag
This section describes how to set the protocol type in the outer VLAN tag on an interface.
5.7 Configuration Examples
This section provides several configuration examples of QinQ.
Issue 03 (2009-08-20)
5
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

QinQ Configuration

5 QinQ Configuration
5-1