Example For Configuring Vlan Damping - Huawei Quidway S9300 Configuration Manual

3 VLAN Configuration
Configuration Files
Configuration file of the S9300
#
sysname Quidway
#
vlan batch 2 to 4
#
vlan 2
mux-vlan
subordinate group 3
subordinate separate 4
#
interface gigabitethernet 1/0/1
port link-type access
port default vlan 2
port mux-vlan enable
#
interface gigabitethernet 1/0/2
port link-type access
port default vlan 3
port mux-vlan enable
#
interface gigabitethernet 1/0/3
port link-type access
port default vlan 3
port mux-vlan enable
#
interface gigabitethernet 1/0/4
port link-type access
port default vlan 4
port mux-vlan enable
#
interface gigabitethernet 1/0/5
port link-type access
port default vlan 4
port mux-vlan enable
#
return

3.10.6 Example for Configuring VLAN Damping

Networking Requirements
As shown in
through VLANIF 10.
The VLAN damping feature is configured on VLANIF 10 to prevent route flapping caused by
the change of the VLANIF interface status.
3-40
Figure 3-7, the hosts in VLAN 10 communicate with the hosts outside VLAN 10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)