Huawei Quidway S9300 Configuration Manual page 121

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create VLANs on the S9300s.
# Create VLAN 6 on S9300-A.
<Quidway> system-view
[Quidway] sysname S9300-A
[S9300-A] vlan 6
# Create VLAN 5 on S9300-B.
<Quidway> system-view
[Quidway] sysname S9300-B
[S9300-B] vlan 5
# Create VLAN 10 on S9300-C.
<Quidway> system-view
[Quidway] sysname S9300-C
[S9300-C] vlan 10
# Create VLAN 10 on S9300-D.
<Quidway> system-view
[Quidway] sysname S9300-D
[S9300-D] vlan 10
Step 2 Add interfaces to VLANs.
# Add GE 3/0/1 and GE 3/0/2 of S9300-A to VLAN 6.
[S9300-A] interface gigabitethernet 3/0/1
[S9300-A-Gigabitethernet3/0/1] port link-type trunk
[S9300-A-Gigabitethernet3/0/1] port trunk allow-pass vlan 6
[S9300-A-Gigabitethernet3/0/1] quit
[S9300-A] interface gigabitethernet 3/0/2
[S9300-A-Gigabitethernet3/0/2] port link-type trunk
[S9300-A-Gigabitethernet3/0/2] port trunk allow-pass vlan 6
[S9300-A-Gigabitethernet3/0/2] quit
# Add GE 1/0/1 of S9300-A to VLAN 6.
[S9300-A] interface gigabitethernet 1/0/1
[S9300-A-GigabitEthernet1/0/1] port link-type trunk
[S9300-A-GigabitEthernet1/0/1] port trunk allow-pass vlan 6
[S9300-A-GigabitEthernet1/0/1] quit
# Add GE 3/0/1 and GE 3/0/2 of S9300-B to VLAN 5.
[S9300-B] interface gigabitethernet 3/0/1
[S9300-B-Gigabitethernet3/0/1] port link-type trunk
Issue 03 (2009-08-20)
Add interfaces of 9300-A, S9300-B, S9300-C, and S9300-D to the corresponding VLANs.
Configure VLAN mapping of single tag on GE 1/0/1 of S9300-A.
Configure VLAN mapping of single tag on GE 2/0/2 of S9300-B.
VLAN to be created on S9300-A: VLAN 6
VLAN to be created on S9300-B: VLAN 5
VLAN to be created on S9300-C and S9300-D: VLAN 10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VLAN Mapping Configuration
4-17