Example For Configuring Vlan Aggregation; Figure 3-5 Typical Networking Of Vlan Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
vlan batch 10 20
#
interface Ethernet0/0/1
port link-type access
port default vlan 10
#
interface Ethernet0/0/2
port link-type access
port default vlan 20
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10 20
#
return

3.10.4 Example for Configuring VLAN Aggregation

Networking Requirements
As shown in
The sub-VLANs, namely, VLAN 2 and VLAN 3 cannot ping each other.
After proxy ARP is configured, VLAN 2 and VLAN 3 can ping each other.

Figure 3-5 Typical networking of VLAN configuration

Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Issue 03 (2009-08-20)
Figure 3-5, VLAN 2 and VLAN 3 compose a super-VLAN, namely, VLAN 4.
S9300
GE1/0/0
GE2/0/0
VLAN2
VLAN2
Add interfaces of the S9300 to sub-VLANs.
Add the sub-VLANs to a super-VLAN.
Configure routes for the super-VLAN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE3/0/0
GE4/0/0
VLAN3
VLAN4
VLANIF4： 100.1.1.12/24
VLAN3
3 VLAN Configuration
3-35