Assigning An Ip Address To An Interface; Enabling Inter-Vlan Proxy Arp - Huawei Quidway S9300 Configuration Manual

7 ARP Configuration
No.
2

7.6.2 Assigning an IP Address to an Interface

Context
Do as follows on the S9300.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface vlanif vlan-id
The VLANIF interface view is displayed.
Inter-VLAN proxy ARP can be enabled only on the VLANIF interface of the S9300.
Step 3 Run:
ip address ip-address { mask | mask-length }
The IP address is assigned to the interface.
The IP address of the interface enabled with inter-VLAN proxy ARP must be on the same
network segment with the IP address of the host connected to this interface, in a LAN.
----End

7.6.3 Enabling Inter-VLAN Proxy ARP

Context
Do as follows on the S9300.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface vlanif vlan-id
The VLANIF interface view is displayed.
7-12
Data
IP address of the interface enabled with inter-VLAN proxy ARP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)