Huawei Quidway S9300 Configuration Manual page 154

5 QinQ Configuration
<Quidway> system-view
[Quidway] sysname S9300-A
[S9300-A] vlan batch 2 3
# On S9300-B, create VLAN 2 and VLAN 3, that is, the VLAN IDs of the outer VLAN tag to
be added.
<Quidway> system-view
[Quidway] sysname S9300-B
[S9300-B] vlan batch 2 3
Step 2 Configure traffic policies on the S9300s.
# Configure traffic policies on S9300-A.
[S9300-A] traffic classifier name1
[S9300-A-classifier-name1] if-match vlan-id 10 to 30
[S9300-A-classifier-name1] if-match vlan-id 31 to 50
[S9300-A-classifier-name1] quit
[S9300-A] traffic behavior name1
[S9300-A-behavior-name1] nest top-most vlan-id 2
[S9300-A-behavior-name1] quit
[S9300-A] traffic policy name1
[S9300-A-trafficpolicy-name1] classifier name1 behavior name1
[S9300-A-trafficpolicy-name1] quit
[S9300-A] traffic classifier name2
[S9300-A-classifier-name2] if-match vlan-id 51 to 60
[S9300-A-classifier-name2] quit
[S9300-A] traffic behavior name2
[S9300-A-behavior-name2] nest top-most vlan-id 3
[S9300-A-behavior-name2] quit
[S9300-A] traffic policy name2
[S9300-A-trafficpolicy-name2] classifier name2 behavior name2
[S9300-A-trafficpolicy-name2] quit
# Configure traffic policies on S9300-B.
[S9300-B] traffic classifier name1
[S9300-B-classifier-name1] if-match vlan-id 10 to 30
[S9300-B-classifier-name1] if-match vlan-id 31 to 50
[S9300-B-classifier-name1] quit
[S9300-B] traffic behavior name1
[S9300-B-behavior-name1] nest top-most vlan-id 2
[S9300-B-behavior-name1] quit
[S9300-B] traffic policy name1
[S9300-B-trafficpolicy-name1] classifier name1 behavior name1
[S9300-B-trafficpolicy-name1] quit
[S9300-B] traffic classifier name2
[S9300-B-classifier-name2] if-match vlan-id 51 to 60
[S9300-B-classifier-name2] quit
[S9300-B] traffic behavior name2
[S9300-B-behavior-name2] nest top-most vlan-id 3
[S9300-B-behavior-name2] quit
[S9300-B] traffic policy name2
[S9300-B-trafficpolicy-name2] classifier name2 behavior name2
[S9300-B-trafficpolicy-name2] quit
Step 3 Configure selective QinQ on the interfaces.
# Configure GE 1/0/1 of S9300-A.
[S9300-A] interface gigabitethernet 1/0/1
[S9300-A-GigabitEthernet1/0/1] port link-type hybrid
[S9300-A-GigabitEthernet1/0/1] port hybrid untagged vlan 2
[S9300-A-GigabitEthernet1/0/1] traffic-policy name1 inbound
[S9300-A-GigabitEthernet1/0/1] quit
# Configure GE 1/0/2 of S9300-A.
5-22 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)