Example For Configuring A Trunk; Figure 3-3 Networking Diagram For Configuring A Trunk - Huawei Quidway S9300 Configuration Manual

3 VLAN Configuration

3.10.2 Example for Configuring a Trunk

Networking Requirements
As shown in
after the users go online. The S9300 adds VLAN tags to user packets, and then relays the user
packets to the BRAS.
An enterprise user is connected to the S9300 through a leased line. The S9300 adds VLAN tags
to the packets from the enterprise user, and then forwards the packets to the router.
The Internet access users belong to VLAN 100, and the enterprise user belongs to VLAN 3000.
GE2/0/0 of the S9300 is a trunk interface and can forward VLAN packets of the Internet access
users and the enterprise user.
The S9300 is connected to the DSLAM and enterprise network through GE interfaces. The S9300
is connected to the switch through a 10GE interface.

Figure 3-3 Networking diagram for configuring a trunk

DSLAM
PC
Precautions
During the configuration, pay attention to the following:
3-30
Figure 3-3, the DSLAM forwards packets of Internet access users to the S9300
BRAS
Switch
GE2/0/0
S9300
GE1/0/0
GE1/0/5
VLAN 100
VLAN 3000
PC
PC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Router
Enterprise
Issue 03 (2009-08-20)