Huawei Quidway S9300 Configuration Manual page 198

7 ARP Configuration
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure the super-VLAN and sub-VLAN.
# Configure sub-VLAN 2.
<Quidway> system-view
[Quidway] vlan 2
[Quidway-vlan2] quit
# Add GE 1/0/0 and GE 1/0/1 to sub-VLAN 2.
[Quidway] interface gigabitethernet 1/0/0
[Quidway-GigabitEthernet1/0/0] port link-type access
[Quidway-GigabitEthernet1/0/0] port default vlan 2
[Quidway-GigabitEthernet1/0/0] quit
[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] port link-type access
[Quidway-GigabitEthernet1/0/1] port default vlan 2
[Quidway-GigabitEthernet1/0/1] quit
# Configure sub-VLAN 3.
<Quidway> system-view
[Quidway] vlan 3
[Quidway-vlan3] quit
# Add GE2/0/0 and GE2/0/1 to sub-VLAN 3.
[Quidway] interface gigabitethernet 2/0/0
[Quidway-GigabitEthernet2/0/0] port link-type access
[Quidway-GigabitEthernet2/0/0] port default vlan 3
[Quidway-GigabitEthernet2/0/0] quit
[Quidway] interface gigabitethernet 2/0/1
[Quidway-GigabitEthernet2/0/1] port link-type access
[Quidway-GigabitEthernet2/0/1] port default vlan 3
[Quidway-GigabitEthernet2/0/1] quit
# Configure super-VLAN 4 and add sub-VLAN 2 to super-VLAN 4.
[Quidway] vlan 4
[Quidway-vlan4] aggregate-vlan
7-22
Configure a super-VLAN and a sub-VLAN.
Add an interface to the sub-VLAN.
Create an VLANIF interface of the super-VLAN and assign an IP address to the VLANIF
interface.
Enable inter-VLAN proxy ARP.
VLAN IDs of the super-VLAN and sub-VLAN
GE 1/0/1 and GE 1/0/0 belonging to sub-VLAN 2
GE 2/0/0 and GE 2/0/1 belonging to sub-VLAN 3
IP address and subnet mask of VLANIF 4 in super-VLAN 4 being 10.10.10.1 and
255.255.255.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)