Figure 5-1 Networking Diagram For Configuring Qinq On Interfaces - Huawei Quidway S9300 Configuration Manual

5 QinQ Configuration
office locations of the two enterprises access S9300-G or S9300-F of the ISP network. The
network of Enterprise 1 is divided into VLAN 2 to VLAN 1500; the network of Enterprise 2 is
divided into VLAN 500 to VLAN 4094. It is required that the office locations of each enterprise
communicate with each other but the two enterprises be isolated from each other.

Figure 5-1 Networking diagram for configuring QinQ on interfaces

Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
5-14
Enterprise 2
......
VLAN4094
VLAN1000
......
VLAN2
VLAN500
Enterprise 1
Create VLAN 10 and VLAN 20 on S9300-F; create VLAN 20 on S9300-G.
Set GE 1/0/1, GE 2/0/1, and GE 3/0/1 of S9300-F as QinQ interfaces.
Set GE 1/0/1 and GE 2/0/1 of S9300-G as QinQ interfaces.
Add GE 4/0/1 of S9300-F and GE 3/0/1 of S9300-G to VLAN 20 in tagged mode.
VLAN 10 assigned to Enterprise 1 on the ISP network
VLAN 20 assigned to Enterprise 2 on the ISP network.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/1 GE2/0/1
S9300-G
GE3/0/1
GE4/0/1
S9300-F
GE3/0/1
GE1/0/1
GE2/0/1
......
VLAN2000
VLAN1000
Enterprise 2
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Enterprise 2
......
VLAN2500
VLAN500
......
VLAN1500
VLAN100
Enterprise 1
Issue 03 (2009-08-20)