Example For Configuring Inter-Vlan Proxy Arp; Figure 7-3 Networking Diagram For Configuring Inter-Vlan Proxy Arp - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Internet Address
172.16.1.1
----End
Configuration Files
Configuration file of the S9300
#
sysname Quidway
#
vlan batch 2 to 3
#
interface Vlanif2
ip address 172.16.1.1 255.255.255.0
arp-proxy enable
#
interface Vlanif3
ip address 172.16.2.1 255.255.255.0
arp-proxy enable
#
interface GigabitEthernet1/0/0
port link-type access
port default vlan 2
#
interface GigabitEthernet1/0/1
port link-type access
port default vlan 3
#
return

7.9.3 Example for Configuring Inter-VLAN Proxy ARP

Networking Requirements
As shown in
l
l

Figure 7-3 Networking diagram for configuring inter-VLAN proxy ARP

Issue 03 (2009-08-20)
Physical Address
00e0-fc39-80aa
Figure 7-3, VLAN 2 and VLAN 3 constitute super-VLAN 4. It is required that:
Hosts in the sub-VLANs 2 and 3 should not be pinged mutually.
Hosts in VLAN 2 and VLAN 3 should be pinged mutually after inter-VLAN proxy ARP
is enabled.
S9300
VLAN2
VLAN2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type
dynamic
VLAN3
VLAN4
VLAN3
7 ARP Configuration
7-21