Figure 5-2 Typical Networking Of Selective Qinq - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
of User 1, namely, common access users (PC1) and multicast users (TV1). Only one kind of
users exist on the network of User 2, namely, VIP user (PC2), for example, Internet cafe. It is
required that the common access users, the multicast users, and the VIP users be isolated from
each other but each type of users can communicate remotely. Each kind of users correspond to
a QoS level. The VIP users and multicast users must enjoy highest QoS level.

Figure 5-2 Typical networking of selective QinQ

Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Issue 03 (2009-08-20)
PC1
User 1
TV1
S9300-A
User 2
PC2
Create VLAN 2 and VLAN 3 on S9300-A; create VLAN 2 and VLAN 3 on S9300-B.
Set GE 1/0/1 and GE 1/0/2 of S9300-A as hybrid interfaces and enable selective QinQ.
Set GE 2/0/1 and GE 2/0/2 of S9300-B as hybrid interfaces and enable selective QinQ.
Add GE 1/0/3 of S9300-A and GE 2/0/3 of S9300-B to VLAN 2 and VLAN 3 in tagged
mode.
VLAN 10 to VLAN 30 that PC1 belongs to
VLAN 31 to VLAN 50 that TV1 belongs to
VLAN 51 to VLAN 60 that PC2 belongs to
VLAN 2 assigned to User 1 on the public network
VLAN 3 assigned to User 2 on the public network
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/1
GE2/0/1
GE1/0/3
GE2/0/3
GE2/0/2
GE1/0/2
5 QinQ Configuration
User 2
PC2
S9300-B
User 1
PC1
TV1
5-17