Configuring A Vlan-Based Bpdu Tunnel; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
BPDU Received
<Quidway2> display stp
-------[CIST Global Info] [Mode MSTP] -------
CIST Bridge
Bridge Times
CIST Root/ERPC
CIST RegRoot/IRPC
CIST RootPortId
BPDU-Protection
TC or TCN received
STP Converge Mode
Time since last TC received :0 days 2h:26m:42s
----[Port1(GigabitEthernet1/0/0)] [FORWARDING] ----
Port Protocol
Port Role
Port Priority
Port Cost(Dot1T )
Desg. Bridge/Port
Port Edged
Point-to-point
Transit Limit
Protection Type
PortTimes
BPDU Sent
BPDU Received

9.4 Configuring a VLAN-based BPDU Tunnel

This section describes how to configure a VLAN-based BPDU tunnel.

9.4.1 Establishing the Configuration Task

9.4.2 Enabling Spanning Tree Calculation on the PE and CE
Do as follows on the CE and PE devices.
9.4.3 Configuring BPDUs Sent from a CE Device to a PE Device to Contain the Specified VLAN
ID
Do as follows on the CE devices.
9.4.4 Configuring a VLAN-based BPDU Tunnel
9.4.5 Configuring a PE Interface at the PSN Side to Forward BPDUs with the Specified VLAN
Tag
Do as follows on the PE devices.
9.4.6 Checking the Configuration
9.4.1 Establishing the Configuration Task
Applicable Environment
If each user-side PE interface is connected to multiple CE devices, BPDUs sent from user
networks must contain VLAN tags so that the PE device can identify BPDUs from different user
networks. To implement transparent transmission of BPDUs on the ISP network, you need to
configure VLAN-based BPDU tunnels. After the configuration, BPDUs of different user
Issue 03 (2009-08-20)
TCN: 0, Config: 0, RST: 0, MST: 6
:4351
TCN: 0, Config: 0, RST: 0, MST: 4351
:32768.00e0-fc9a-4315
:Hello 2s MaxAge 20s FwDly 15s MaxHop 20
:32768.00e0-fc9a-4315 / 0
:32768.00e0-fc9a-4315 / 0
:0.0
:disabled
:3
:Fast
:enabled
:CIST Designated Port
:128
:Config=auto / Active=199999
:32768.00e0-fc9a-4315 / 128.82
:Config=disabled / Active=disabled
:Config=auto / Active=true
:3 packets/hello-time
:None
:Hello 2s MaxAge 20s FwDly 15s RemHop 0
:4534
TCN: 0, Config: 0, RST: 0, MST: 4534
:6
TCN: 0, Config: 0, RST: 0, MST: 6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 BPDU Tunnel Configuration
9-13