Optional) Setting The Traffic Unit For A Radius Server; Optional) Setting Retransmission Parameters On A Radius Server - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
The RADIUS server template view is displayed.
Step 3 Run:
radius-server user-name domain-included
The user name format supported by a RADIUS server is set.
By default, a user name supported by a RADIUS server contains the domain name. That is, the
S3700 sends the user name, domain name, and domain name delimiter to the RADIUS server
for authentication.
When the RADIUS server does not accept the user name that contains the domain name, you
can run the undo radius-server user-name domain-included command to delete the domain
name before sending it to the RADIUS server.
----End

1.4.8 (Optional) Setting the Traffic Unit for a RADIUS Server

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
The RADIUS server template view is displayed.
Step 3 Run:
radius-server traffic-unit { byte | kbyte | mbyte | gbyte }
The traffic unit is set for a RADIUS server.
By default, the traffic is expressed in bytes on the S3700.
----End
1.4.9 (Optional) Setting Retransmission Parameters on a RADIUS
Server
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
14