Enabling The Mux Vlan Function On The Interface; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

3 VLAN Configuration
l
----End

3.7.4 Enabling the MUX VLAN Function on the Interface

Context
Do as follows on the S9300 where you need to enable the MUX VLAN function.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port mux-vlan enable
The MUX VLAN function is enabled on the interface.
You can enable the MUX VLAN function on an interface only after the interface is added to the
MUX VLAN or subordinate VLAN.
The interface enabled with the MUX VLAN function can be added to only one VLAN.
----End

3.7.5 Checking the Configuration

3-24
NOTE
vlan-id1 and vlan-id2 are integers that range from 2 to 4094. vlan-id2 must be greater than
vlan-id1.
Configuring the subordinate separate VLAN
1. Run:
system-view
The system view is displayed.
2. Run:
vlan vlan-id
The MUX VLAN view is displayed.
3. Run:
subordinate separate vlan-id
The subordinate separate VLAN is configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)