Figure 5-3 Typical Networking Of Selective Qinq - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet

Figure 5-3 Typical networking of selective QinQ

PC1
TV1
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Create VLAN 2 and VLAN 3.
# On S9300-A, create VLAN 2 and VLAN 3, that is, the VLAN IDs of the outer VLAN tag to
be added.
Issue 03 (2009-08-20)
User 1
S9300-A
User 2
PC2
Create VLAN 2 and VLAN 3 on S9300-A; create VLAN 2 and VLAN 3 on S9300-B.
Set GE 1/0/1 and GE 1/0/2 of S9300-A as hybrid interfaces and configure flow-based
selective QinQ on the interfaces.
Set GE 2/0/1 and GE 2/0/2 of S9300-B as hybrid interfaces and configure flow-based
selective QinQ on the interfaces.
Add GE 1/0/3 of S9300-A and GE 2/0/3 of S9300-B to VLAN 2 and VLAN 3 in tagged
mode.
VLANs that PC1 users belong to: VLAN 10 to VLAN 30
VLANs that users of TV1 belong to: VLAN 31 to VLAN 50
VLANs that PC2 users belong to: VLAN 51 VLAN 60
VLAN assigned to the network of User 1 on the ISP network: VLAN 2
VLAN assigned to the network of User 2 on the ISP network: VLAN 3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/1
GE2/0/1
GE1/0/3
GE2/0/3
GE2/0/2
GE1/0/2
5 QinQ Configuration
User 2
PC2
S9300-B
User 1
PC1
TV1
5-21