Example For Configuring Flow-Based Vlan Mapping - Huawei Quidway S9300 Configuration Manual

4 VLAN Mapping Configuration
Configuration Files
l
#
sysname S9300-A
#
vlan batch 100
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 100
port vlan-mapping outside-vlan 300 inside-vlan 30 map-outside-vlan 100 map-inside-
vlan 10
#
return
l
#
sysname S9300-B
#
vlan batch 200
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 200
port vlan-mapping outside-vlan 300 inside-vlan 30 map-outside-vlan 200 map-inside-
vlan 20
#
return
l
#
sysname S9300-C
#
vlan batch 300
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 300
#
return
l
#
sysname S9300-D
#
vlan batch 300
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 300
#
return

4.6.3 Example for Configuring Flow-based VLAN Mapping

Networking Requirements
As shown in
A; outer VLAN ID 200 and inner VLAN ID 20 are assigned to Enterprise B. Hosts in Enterprise
A and Enterprise B communicates through the ISP network. Outer VLAN ID 300 and inner
VLAN 30 assigned to the ISP network.
4-22
Configuration file of S9300-A
Configuration file of S9300-B
Configuration file of S9300-C
Configuration file of S9300-D
Figure 4-3, outer VLAN ID 100 and inner VLAN ID 10 are assigned Enterprise
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)