Huawei Quidway S9300 Configuration Manual page 99

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Step 4 Configure VLAN 4.
# Configure the super-VLAN.
[Quidway] vlan 4
[Quidway-vlan4] aggregate-vlan
[Quidway-vlan4] access-vlan 2 to 3
# Configure the VLANIF interface.
[Quidway] interface vlanif 4
[Quidway-Vlanif4] ip address 100.1.1.12 255.255.255.0
[Quidway-Vlanif4] quit
Step 5 Configure the personal computers.
Configure the IP address for each personal computer and make them reside in the same network
segment with VLAN 4.
After the preceding configuration, the personal computers and the S9300 can ping each other,
but the computers in VLAN 2 and the computers in VLAN 3 cannot ping each other.
Step 6 Configure proxy ARP.
[Quidway] interface vlanif 4
[Quidway-Vlanif4] arp-proxy enable
[Quidway-Vlanif4] arp-proxy inter-sub-vlan-proxy enable
Step 7 Verify the configuration.
After the preceding configuration, the computers in VLAN 2 and the computers in VLAN 3 can
ping each other.
----End
Configuration Files
Configuration file of the S9300
#
sysname Quidway
#
vlan batch 2 to 4
#
vlan 4
aggregate-vlan
access-vlan 2 to 3
#
interface Vlanif4
ip address 100.1.1.12 255.255.255.0
arp-proxy enable
arp-proxy inter-sub-vlan-proxy enable
#
interface GigabitEthernet1/0/0
port link-type access
port default vlan 2
#
interface GigabitEthernet2/0/0
port link-type access
port default vlan 2
#
interface GigabitEthernet3/0/0
port link-type access
port default vlan 3
#
interface GigabitEthernet4/0/0
port link-type access
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 VLAN Configuration
3-37