Huawei Quidway S9300 Configuration Manual page 72
Terabit routing switch
Hide thumbs
Also See for Quidway S9300:
- Configuration manual - network management (630 pages) ,
- Configuration manual (603 pages) ,
- Configuration manual - multicast (262 pages)
Table of Contents
Advertisement
3 VLAN Configuration
Context
You can add an access interface to the VLAN.
Procedure
l
l
3-10
Adding an access interface to a VLAN in the VLAN view
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The interface view is displayed.
3.
Run:
port link-type access
The link type of the interface is set to access.
By default, the link type of an interface is hybrid.
4.
Run:
quit
Return to the system view.
5.
Run:
vlan vlan-id
The VLAN view is displayed.
6.
Run:
port interface-type { interface-number1 [ to interface-number2 ] }&<1-10>
The access interface is added to the VLAN, which becomes the default VLAN of the
interface.
Adding an access interface to a VLAN in the interface view
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The interface view is displayed.
3.
Run:
port link-type access
The link type of the interface is set to access.
By default, the link type of an interface is hybrid.
4.
Run:
port default vlan vlan-id
The default VLAN of the interface is set.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)
Advertisement
Table of Contents
