Figure 7-1 Networking Diagram For Configuring Arp - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
l

Figure 7-1 Networking diagram for configuring ARP

PC
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Create a VLAN and add an interface to the VLAN.
# Create VLAN 2 and VLAN 3.
Issue 03 (2009-08-20)
To ensure the security of the server and prevent invalid ARP packets, a static ARP entry
should be created on GE 1/0/2 of the S9300, with the IP address of the router being 10.2.2.3
and the MAC address being 00e0-fc01-0000.
Router
GE1/0/1
LSW
PC
PC
Create a VLAN and add an interface to the VLAN.
Set dynamic ARP parameters on a VLANIF interface at the user side.
Create a static ARP entry.
GE 1/0/1 added to VLAN 2 and GE 1/0/2 added to VLAN 3
VLANIF 2 with the IP address being 2.2.2.2 and subnet mask being 255.255.255.0, aging
time of ARP entries being 60s, and number of detection times being 2
LSW with the IP address being 2.2.2.1 and subnet mask being 255.255.255.0
Interface connecting the router and the S9300, with the IP address being 10.2.2.3, subnet
mask being 255.255.255.0, and MAC address being 00e0-fc01-0000
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Server
Internet
GE1/0/2
S9300
7 ARP Configuration
7-17