Figure 4-2 Networking Diagram For Configuring Vlan Mapping Of Double Vlan Tags - Huawei Quidway S9300 Configuration Manual

4 VLAN Mapping Configuration
Networking Requirements
As shown in
A; outer VLAN ID 200 and inner VLAN ID 20 are assigned to Enterprise B. Hosts in Enterprise
A and Enterprise B communicate through the ISP network. Outer VLAN ID 300 and inner VLAN
30 assigned to the ISP network.

Figure 4-2 Networking diagram for configuring VLAN mapping of double VLAN tags

Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create VLANs on the S9300s.
# Create VLAN 100 on S9300-A.
<Quidway> system-view
[Quidway] sysname S9300-A
[S9300-A] vlan 100
4-20
Figure 4-2, outer VLAN ID 100 and inner VLAN ID 10 are assigned to Enterprise
S9300-C
GE1/0/1
S9300-A
GE1/0/1
Enterprise A
Outer: VLAN 100
Inner: VLAN 10
Create VLANs on S9300-A, S9300-B, S9300-C, and S9300-D.
Add interfaces of 9300-A, S9300-B, S9300-C, and S9300-D to the corresponding VLANs.
Configure VLAN mapping of double tags on GE 1/0/1 of S9300-A.
Configure VLAN mapping of double tags on GE 1/0/2 of S9300-A.
VLAN to be created on S9300-A: VLAN 100
VLAN to be created on S9300-B: VLAN 200
VLAN to be created on S9300-C and S9300-D: VLAN 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ISP
Outer: VLAN 300
Inner: VLAN 30
S9300-D
GE1/0/2
GE1/0/2
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
S9300-B
Enterprise B
Outer: VLAN 200
Inner: VLAN 20
Issue 03 (2009-08-20)