Establishing The Configuration Task; Setting The Link Type Of An Interface - Huawei Quidway S9300 Configuration Manual

5 QinQ Configuration

5.5.1 Establishing the Configuration Task

Applicable Environment
To enable users to communicate through the ISP network, the ISP devices need to add outer
VLAN tags to the packets passing through the ISP network to identify the packets from different
user networks.
Pre-configuration Tasks
None.
Data Preparation
To configure flow-based selective QinQ, you need the following data.
No.
1
2
3

5.5.2 Setting the Link Type of an Interface

Context
Do as follows on the S9300 where you need to configure selective QinQ.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port link-type trunk
Or
port link-type hybrid
The type of the interface is set to hybrid or trunk.
5-8
Data
Number of the interface where selective QinQ is to be configured
VLAN IDs in the inner VLAN tag
VLAN IDs in the outer VLAN tag
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)