Creating A Vlanif Interface; Assigning An Ip Address To The Vlanif Interface - Huawei Quidway S9300 Configuration Manual

3 VLAN Configuration
No.
1
2

3.5.2 Creating a VLANIF Interface

Context
Do as follows on the S9300 where you need to configure the VLANIF interface.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface vlanif vlan-id
The VLANIF interface is created and the VLANIF interface view is displayed.
----End

3.5.3 Assigning an IP Address to the VLANIF Interface

Context
Do as follows on the S9300 where you need to configure the VLANIF interface.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface vlanif vlan-id
The VLANIF interface is created and the VLANIF interface view is displayed.
Step 3 Run:
ip address ip-address { mask | mask-length }
The IP address of the VLANIF interface is configured.
----End
3-16
Data
VLAN ID
IP address of a VLANIF interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)