Replacing The Outer Vlan Tag - Huawei Quidway S9300 Configuration Manual

4 VLAN Mapping Configuration
----End

4.5.4 Replacing the Outer VLAN Tag

4-12
4. Run:
if-match cvlan-id vlan-id4
The packet matching rule, that is, the inner VLAN IDs of packets matching the
classifier, is set.
5. Run:
quit
Return to the system view.
6. Run:
traffic behavior name2
A traffic behavior is created and the traffic behavior view is displayed.
7. Run:
remark vlan-id vlan-id1
The S9300 is configured to replace the outer VLAN ID of the packets matching the
traffic classifier with the specified VLAN ID.
8. Run:
remark cvlan-id vlan-id2
The S9300 is configured to replace the inner VLAN ID of the packets matching the
traffic classifier with the specified VLAN ID.
9. Run:
quit
Return to the system view.
10. Run:
traffic policy name2
A traffic policy is created and the policy view is displayed.
11. Run:
classifier name2 behavior name2
The traffic classifier is bound to the traffic behavior in the traffic policy.
12. Run:
quit
Return to the system view.
13. Run:
interface interface-type interface-number
The interface view is displayed.
14. Run:
traffic-policy name2 outbound
The traffic policy is applied in the outbound direction of the interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)