Establishing The Configuration Task; Configuring Bpdu Protection On The S9300 - Huawei Quidway S9300 Configuration Manual

8 MSTP Configuration

8.5.1 Establishing the Configuration Task

8.5.2 Configuring BPDU Protection on the S9300

8.5.3 Configuring Root Protection on an Interface
8.5.4 Configuring Loop Protection on the S9300
8.5.5 Configuring TC Packet Suppression on the S9300
8.5.6 Checking the Configuration
8.5.1 Establishing the Configuration Task
Applicable Environment
You can configure the MSTP protection function in the following ways:
l
l
l
Pre-configuration Tasks
Before configuring MSTP protection on the S9300, complete the following tasks:
l
l
l
l
Data Preparation
To configure MSTP protection on the S9300, you need the following data.
No.
1
2
8.5.2 Configuring BPDU Protection on the S9300
Context
Do as follows on the S9300 with an edge port.
8-22
Configure BPDU protection on the switch with edge ports.
Configure root protection on the root switch.
Configure loop protection on the root port and alternate port.
Configuring physical attributes of the ports
Configuring VLAN features of the ports
Adding the S9300 to the specified MST region
Configuring an edge port on the S9300 before configuring BPDU protection
Data
Number of the port on which root protection is to be enabled
Number of the port on which loop protection is to be enabled
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)