Example For Configuring The Mux Vlan; Figure 3-6 Typical Networking Of Mux Vlan Configuration - Huawei Quidway S9300 Configuration Manual

3 VLAN Configuration
port default vlan 3
#
return

3.10.5 Example for Configuring the MUX VLAN

Networking Requirements
As shown in
as the MUX VLAN; GE 1/0/2 and GE 1/0/3 are added to VLAN 3, which is set as the group
VLAN; GE 1/0/4 and GE 1/0/5 are added to VLAN 4, which is set as the separate VLAN.
GE1/0/1 is connected to Host A; GE 1/0/2 is connected to Host B; GE 1/0/3 is connected to Host
C; GE 1/0/4 is connected to Host D; GE 1/0/5 is connected to Host E.
Host A can ping Host B and Host C. Host B and Host C can also ping Host A.
Host A can ping Host D and Host E. Host D and Host E can also ping Host A.
Host B and Host C can ping each other.
Host D and Host E cannot ping each other.
Host B and Host C cannot ping Host D or host E. Host D and Host E cannot ping Host B or Host
C.

Figure 3-6 Typical networking of MUX VLAN configuration

HostB
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
3-38
Figure 3-6, VLAN 2 is configured on GE 1/0/1 of the S9300 and VLAN 2 is set
GE1/0/2
GE1/0/3 GE1/0/4
HostC
VLAN 3
Configure the MUX VLAN.
Configure the group VLAN.
Configure the separate VLAN.
Add interfaces to the VLAN and enable the MUX VLAN function.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/1
GE1/0/5
HostD
HostE
VLAN 4
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
HostA
VLAN 2
Issue 03 (2009-08-20)