Example For Configuring Flow-Based Selective Qinq - Huawei Quidway S9300 Configuration Manual

5 QinQ Configuration
l
----End
Configuration Files
The following lists the configuration files of the S9300.
l
#
sysname S9300-A
#
vlan batch 2 to 3
#
interface GigabitEthernet1/0/1
port hybrid untagged vlan 2
port vlan-stacking outside-vlan 10 to 50 stack-vlan 2
#
interface GigabitEthernet1/0/2
port hybrid untagged vlan 3
port vlan-stacking outside-vlan 51 to 60 stack-vlan 3
#
interface GigabitEthernet1/0/3
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return
l
#
sysname S9300-B
#
vlan batch 2 to 3
#
interface GigabitEthernet2/0/1
port hybrid untagged vlan 3
port vlan-stacking outside-vlan 51 to 60 stack-vlan 3
#
interface GigabitEthernet2/0/2
port hybrid untagged vlan 2
port vlan-stacking outside-vlan 10 to 50 stack-vlan 2
#
interface GigabitEthernet2/0/3
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return

5.7.3 Example for Configuring Flow-based Selective QinQ

Networking Requirements
As shown in
communicate with each other through the ISP network. Two types of users exist on the network
of User 1, namely, common access users (PC1) and multicast users (TV1). Only one kind of
users exist on the network of User 2, namely, VIP user (PC2), for example, Internet cafe. It is
required that the common access users, the multicast users, and the VIP users be isolated from
each other but each type of users can communicate remotely. Each kind of users correspond to
a QoS level. The VIP users and multicast users must enjoy highest QoS level.
5-20
The networks of User 1 and User 2 are isolated from each other.
Configuration file of S9300-A
Configuration file of S9300-B
Figure 5-3, User 1 and User 2 belong to different networks. They need to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)