5 QinQ Configuration
Data Preparation
To set the protocol type in the outer VLAN tag, you need the following data.
No.
1
2
5.6.2 Setting the Link Type of an Interface
Context
Do as follows on the S9300 where you need to set the protocol type in the outer VLAN tag.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port link-type hybrid
The type of the interface is set to hybrid.
By default, the interface type is hybrid.
----End
5.6.3 Setting the Protocol Type of the Outer VLAN Tag
Context
Do as follows on the S9300 where you need to set the protocol type in the outer VLAN tag.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
5-12
Data
Interface number
Protocol type in the outer VLAN tag
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)