Configuring A Port-Based Bpdu Tunnel - Huawei Quidway S9300 Configuration Manual

9 BPDU Tunnel Configuration
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
The VLAN ID ranges from 1 to 4094. If the VLAN specified in the command exists, the VLAN
view is displayed.
Step 3 Run:
quit
Return to the system view.
Step 4 Run:
interface interface-type interface-number
The interface view is displayed.
Step 5 Run:
port hybrid pvid vlan vlan-id
The default VLAN of the hybrid interface is specified.
Step 6 Run:
port hybrid untagged vlan vlan-id
The interface is added to a VLAN in untagged mode. Packets from this VLAN can pass through
the interface.
----End

9.3.4 Configuring a Port-based BPDU Tunnel

Context
Choose
the PE and CE devices of the same role
When PE and CE devices play different roles, the CE device functions as a customer, and the
PE and P devices function as providers.
When PE and CE devices play the same role, they both function as customers or providers.
Procedure
l
9-10
Configuration for the PE and CE devices of different roles
Configuration for the PE and CE devices of different roles
1. Run the following command on the PE and P devices:
system-view
The system view is displayed.
2. Run:
bpdu-tunnel stp bridge role provider
The PE or P device is configured as a provider.
3. Run:
interface interface-type interface-number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
according to the roles of the PE and CE devices.
or Configuration for
Issue 03 (2009-08-20)