3 VLAN Configuration
Figure 3-1 Application scenario of VLAN aggregation
When a great number of VLANs exist on the Ethernet, VLAN aggregation can simplify the
configuration.
Pre-configuration Tasks
Before configuring VLAN aggregation, complete the following task:
l
Data Preparation
To configure VLAN aggregation, you need the following data.
No.
1
2
3
3.6.2 Configuration Sub-VLANs
Context
Do as follows on the S9300 where you need to configure VLAN aggregation.
3-18
Sub-VLAN 2
Connecting interfaces and setting the physical parameters of each interface to make the
physical layer in Up state
Data
IDs of sub-VLANs and interface numbers
ID of the super-VLAN
IP addresses and masks of VLANIF interfaces
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Super VLAN4
Sub-VLAN 3
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)