Establishing The Configuration Task; Setting Mstp Network Parameters Of The S9300 - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
8.4.5 Setting the Format of MSTP Packets
8.4.6 Configuring Fast Transition Mechanism on an Interface
8.4.7 Checking the Configuration

8.4.1 Establishing the Configuration Task

Applicable Environment
On certain networks, you need to modify MSTP parameters of some switches to optimize their
performance.
Pre-configuration Tasks
Before setting MSTP parameters of an S9300, complete the following tasks:
l
l
l
Data Preparation
To set MSTP parameters of an S9300, you need the following data.
No.
1
2
3
4
5
6
7
8

8.4.2 Setting MSTP Network Parameters of the S9300

Context
Do as follows on the S9300 functioning as the root switch in the MST region.
Issue 03 (2009-08-20)
Configuring physical attributes of the ports
Configure the VLANs on each port
Adding the S9300 to the specified MST region
Data
Network diameter
Hello time, forward delay, and max age of the S9300
Maximum number of hops of the spanning tree in an MST region
Priority of the S9300 in the MSTI
Number of the port on which you want to enable or disable MSTP
Priority of the port in the specified MSTI
Method of calculating the path cost of the port, path cost of the port, maximum rate
of sending packets on the port, and STP convergence mode of the port
Protocol format of the packets received and sent through the port
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 MSTP Configuration
8-15