Adding An Outer Vlan Tag; Configuring Selective Qinq - Huawei Quidway S9300 Configuration Manual

5 QinQ Configuration
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port link-type trunk
or
port link-type hybrid
The link type of the interface is set to hybrid or trunk.
By default, the link type of an interface is hybrid.
----End

5.4.3 Adding an Outer VLAN Tag

Context
Do as follows on the S9300 where you need to configure selective QinQ.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The outer VLAN tag is specified.
The VLAN ID of the added outer VLAN tag must exist on the S9300. You do not need to create
the VLANs specified by the original VLAN tags of received packets.
----End

5.4.4 Configuring Selective QinQ

Context
Do as follows on the S9300 where you need to configure selective QinQ.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
5-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)