Figure 3-7 Typical Networking Of Vlan Damping Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet

Figure 3-7 Typical networking of VLAN damping configuration

Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create VLAN 10. The procedure is not given here.
# For details, see
Step 2 Create VLANIF 10.
# Create VLANIF 10 and configure the IP address.
[A] interface vlanif 10
[A-Vlanif10] ip address 10.100.100.100 24
Step 3 Set the delay for VLAN damping.
# Set the delay for VLAN damping to 20 seconds.
[A-Vlanif10] damping time 20
Issue 03 (2009-08-20)
S9300-A
GE2/0/0
10.100.101.10/24
VLANIF10
10.100.100.100/24
10.100.100.111/24
VLAN 10
Create VLAN 10.
Create VLANIF 10 and configure the IP addresses.
Set the delay for VLAN damping on VLANIF 10.
Number of the VLANIF interface
IP address of the VLANIF interface: 10.100.100.100/24
Delay for VLAN damping: of 20 seconds
3.3 Creating
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10.100.101.20/24
10.100.100.110/24
VLANs.
3 VLAN Configuration
S9300-B
GE1/0/0
3-41