Configuring The Mux Vlan; Configuring The Subordinate Vlan - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
No.
2
3

3.7.2 Configuring the MUX VLAN

Context
Do as follows on the S9300 where you need to configure the MUX VLAN.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
Step 3 Run:
mux-vlan
The VLAN is configured as the MUX VLAN.
----End

3.7.3 Configuring the Subordinate VLAN

Context
Do as follows on the S9300 where you need to configure the MUX VLAN.
Procedure
l
Issue 03 (2009-08-20)
Data
VLAN ID of the subordinate group VLAN and interface numbers
VLAN ID of the subordinate separate VLAN and interface numbers
Configuring the subordinate group VLAN
1. Run:
system-view
The system view is displayed.
2. Run:
vlan vlan-id
The MUX VLAN view is displayed.
3. Run:
subordinate group vlan-id1 [ to vlan-id2 ]
The subordinate group VLAN is configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 VLAN Configuration
3-23