Huawei Quidway S9300 Configuration Manual page 199

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
[Quidway-vlan4] access-vlan 2
[Quidway-vlan4] access-vlan 3
[Quidway-vlan4] quit
Step 2 Create and configure VLANIF 4.
# Create VLANIF 4.
[Quidway] interface vlanif 4
# Assign an IP address to VLANIF 4.
[Quidway-Vlanif4] ip address 10.10.10.1 24
Step 3 Enable inter-VLAN proxy ARP on VLANIF 4.
[Quidway-Vlanif4] arp-proxy inter-sub-vlan-proxy enable
[Quidway-Vlanif4] quit
Step 4 Verify the configuration.
# Run the display current-configuration command. You can view the configurations of the
super-VLAN, sub-VLAN, and VLANIF interface. For query results, see the following
configuration file.
----End
Configuration Files
The following lists the configuration file of the S9300.
#
sysname Quidway
#
vlan batch 2 to 4
#
vlan 4
aggregate-vlan
access-vlan 2 to 3
#
interface Vlanif4
ip address 10.10.10.1 255.255.255.0
arp-proxy inter-sub-vlan-proxy enable
#
interface GigabitEthernet1/0/0
port link-type access
port default vlan 2
#
interface GigabitEthernet1/0/1
port link-type access
port default vlan 2
#
interface GigabitEthernet2/0/0
port link-type access
port default vlan 3
#
interface GigabitEthernet2/0/1
port link-type access
port default vlan 3
#
return
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 ARP Configuration
7-23