Juniper ACX1000 Configuration Manual page 809

Action
Meaning
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
From operational mode, run the
user@PCC> show path-computation-client active-pce
PCE pce1
--------------------------------------------
General
PCE IP address
Local IP address
Priority
PCE status
Session type
LSP provisioning allowed : On
P2MP LSP report allowed
P2MP LSP update allowed
P2MP LSP init allowed
PCE-mastership
Counters
PCReqs
PCReps
PCRpts
12
PCUpdates
PCCreates
Timers
Local Keepalive timer:
0 [s]
Remote Keepalive timer:
0 [s]
Errors
PCErr-recv
PCErr-sent
Type: 1
PCE-PCC-NTFS
PCC-PCE-NTFS
The output displays the active PCE that Router PCC is connected to, and the pce1 PCE
parameters and state.
Support of the Path Computation Element Protocol for RSVP-TE Overview on page 692
Chapter 23: Configuring Path Computation Element Protocol (PCEP)
show path-computation-client active-pce
: 10.102.180.246
: 10.102.180.228
: 0
: PCE_STATE_UP
: PCE_TYPE_STATEFULACTIVE
: On
: Off
: Off
: main
Total: 0 last 5min: 0
Total: 0 last 5min: 0
Total: 12 last 5min: 0
Total: 1 last 5min: 0
Total: 0 last 5min: 0
30 [s] Dead timer:
30 [s] Dead timer:
Value: 2
command.
last hour: 0
last hour: 0
last hour:
last hour: 1
last hour: 0
120 [s] LSP cleanup timer:
120 [s] LSP cleanup timer:
Count: 1
751