Juniper ACX1000 Configuration Manual page 816

ACX Series Universal Access Router Configuration Guide
Table 48: Statement Usage and Input Rewrite Operations for VLAN Identifiers for a Bridge
Domain
VLAN Identifier of
Logical Interface
none
200
1000
vlan-tags outer 2000
inner 300
vlan-tags outer 100
inner 400
vlan-id-range 10-100
Table 49: Statement Usage and Output Rewrite Operations for VLAN Identifiers for a Bridge
Domain
VLAN Identifier of
Logical Interface
none
200
1000
vlan-tags outer 2000
inner 300
vlan-tags outer 100 inner 400
vlan-id-range 10-100
758
identifier. "No operation" means that the VLAN tags of the received packet are not
translated for the specified input logical interface.
VLAN Configurations for Bridge Domain
vlan-id none
No operation
pop 200
pop 1000
pop 2000, pop 300
pop 100, pop 400
–
Table 49 on page 758 shows specific examples of how the VLAN tags for packets sent
from the bridge domain are processed and translated, depending on your configuration.
"–" means that the statement is not supported for the specified logical interface VLAN
identifier. "No operation" means that the VLAN tags of the outbound packet are not
translated for the specified output logical interface.
VLAN Configurations for Bridge Domain
vlan-id none
no operation
push 200
push 1000
push 2000, push 300
push 100, push 400
–
vlan-id 200
push 200
No operation
swap 1000 to 200
pop 2000, swap 300
to 200
pop 100, swap 400
to 200
–
vlan-id 200
pop 200
No operation
swap 200 to 1000
swap 200 to 300,
push 2000
swap 200 to 400,
push 100
–
Copyright © 2017, Juniper Networks, Inc.