Onboarding An Ssr Conductor-Managed Ssr1200 Onto Mist Cloud - Juniper SSR1200 Hardware Manual

1. Connect one end of the Ethernet cable to the console port.
2. Connect the other end of the Ethernet cable to the console server (see
management console (see
Figure 13: Connecting the SSR1200 to a Management Console Through a Console Server
Figure 14: Connecting the SSR1200 Directly to a Management Console
Onboarding an SSR Conductor-Managed SSR1200
onto Mist Cloud
IN THIS SECTION
Pre-Onboarding Verification | 36
Onboarding a Conductor-Managed SSR1200 Through the Mist Portal | 39
Assign SSR1200 to a Site | 41
SSR1200 comes pre-installed with the Session Smart Router software version 5.4.4. The appliance
includes a QR code that when scanned, automatically adopts your device into your Mist Organization.
Figure 14 on page 35).
Figure 13 on page 35) or
35