Acx Series; Configuring The Size Of The Mac Address Table For Bridge Domains In Acx Series - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Configuring Static MAC Addresses for Logical Interfaces in a Bridge Domain in ACX
Series
Related
Documentation

Configuring the Size of the MAC Address Table for Bridge Domains in ACX Series

766
You can manually add static MAC entries for the logical interfaces in a bridge domain.
You can specify one or more static MAC addresses for each logical interface.
To add a static MAC address for a logical interface in a bridge domain, include the
static-mac mac-address statement at the
bridge-options interface interface-name]
[edit]
bridge-domains {
bridge-domain-name {
bridge-options {
interface interface-name {
static-mac mac-address {
}
}
}
}
}
Layer 2 Bridge Domains on ACX Series Overview on page 755
Q-in-Q Tunneling on ACX Series Overview on page 770
Layer 2 Learning and Forwarding for Bridge Domains Overview on page 759
Configuring a Bridge Domain on ACX Series Routers on page 760
Configuring Q-in-Q Tunneling on ACX Series on page 771
Configuring VLAN Identifiers for Bridge Domains in ACX Series on page 764
Disabling MAC Learning for Bridge Domains on ACX Series on page 765
Configuring the Size of the MAC Address Table for Bridge Domains in ACX Series on
page 766
You can modify the size of the MAC address table for each bridge domain. The default
table size is 5120 addresses per bridge domain. The minimum you can configure is 1
address, and the maximum is 32,000 addresses.
If the MAC table limit is reached, new addresses can no longer be added to the table.
NOTE: Unused MAC addresses are removed from the MAC address table
automatically. This frees space in the table thereby allowing new entries to
be added.
[edit bridge-domains bridge-domain-name
hierarchy level.
Copyright © 2017, Juniper Networks, Inc.