Disabling Mac Learning For Bridge Domains On Acx Series - Juniper ACX1000 Configuration Manual

Disabling MAC Learning for Bridge Domains on ACX Series

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Configuring a Bridge Domain on ACX Series Routers on page 760
Configuring Q-in-Q Tunneling on ACX Series on page 771
Disabling MAC Learning for Bridge Domains on ACX Series on page 765
Configuring Static MAC Addresses for Logical Interfaces in a Bridge Domain in ACX
Series on page 766
Configuring the Size of the MAC Address Table for Bridge Domains in ACX Series on
page 766
You can disable MAC learning in a bridge domain. Disabling dynamic MAC learning
prevents the bridge domain from learning source MAC addresses.
To disable MAC learning in a bridge domain, include the
the [edit bridge-domains bridge-domain-name bridge-options]
[edit]
bridge-domains {
bridge-domain-name {
bridge-options {
no-mac-learning;
}
}
}
NOTE: When you disable MAC learning, source MAC addresses are not
dynamically learned, and any packets sent to these source addresses are
flooded into the bridge domain.
Layer 2 Bridge Domains on ACX Series Overview on page 755
Q-in-Q Tunneling on ACX Series Overview on page 770
Layer 2 Learning and Forwarding for Bridge Domains Overview on page 759
Configuring a Bridge Domain on ACX Series Routers on page 760
Configuring Q-in-Q Tunneling on ACX Series on page 771
Configuring VLAN Identifiers for Bridge Domains in ACX Series on page 764
Configuring Static MAC Addresses for Logical Interfaces in a Bridge Domain in ACX
Series on page 766
Configuring the Size of the MAC Address Table for Bridge Domains in ACX Series on
page 766
Chapter 24: Configuring Layer 2 Bridging and Q-in-Q Tunneling
no-mac-learning statement at
hierarchy level:
765