Juniper ACX1000 Configuration Manual page 830

ACX Series Universal Access Router Configuration Guide
Related
Documentation
772
vlan-id 500;
}
output-vlan-map pop;
}
}
The following is an example to configure a logical interface connected to a service provider
network:
[edit]
interface ge-1/0/2; {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 500;
}
}
The following is an example to configure the bridge domain:
[edit]
bridge-domains {
qnq-stag-500{
interface ge-1/0/1;
interface ge-1/0/2;
}
}
You can configure Q-in-Q tunneling on aggregated Ethernet interface connected to the
customer network (UNI) and the logical interface connected to the service provider
network (NNI).
Layer 2 Bridge Domains on ACX Series Overview on page 755
Q-in-Q Tunneling on ACX Series Overview on page 770
Layer 2 Learning and Forwarding for Bridge Domains Overview on page 759
Configuring a Bridge Domain on ACX Series Routers on page 760
Configuring VLAN Identifiers for Bridge Domains in ACX Series on page 764
Disabling MAC Learning for Bridge Domains on ACX Series on page 765
Configuring Static MAC Addresses for Logical Interfaces in a Bridge Domain in ACX
Series on page 766
Configuring the Size of the MAC Address Table for Bridge Domains in ACX Series on
page 766
Copyright © 2017, Juniper Networks, Inc.