ACCESS AUTHENTICATION CONTROL COMMANDS
The Access Authentication Control commands in the Command Line Interface (CLI) are listed (along
with the appropriate parameters) in the following table.
Command
create authen_login
method_list_name
config authen_login
delete authen_login
method_list_name
show authen_login
create authen_enable
method_list_name
config authen_enable
delete authen_enable
method_list_name
show authen_enable
enable authen_policy
disable authen_policy
show authen_policy
config authen
application
show authen
application
config authen
parameter
show authen
parameter
create authen
server_host
config authen
server_host
delete authen
server_host
show authen
server_host
create authen
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
<string 15>
[default | method_list_name <string 15>] method [ radius | local | server_group
<string 15> | none]
<string 15>
[all | default | method_list_name <string 15>]
<string 15>
[default | method_list_name <string 15>] method {radius | local | server_group
<string 15> | none}
<string 15>
[all | default | method_list_name <string 15>]
[console | http | all] [login | enable] [default | method_list_name <string 15>]
[attempt <int 1-255> | response_timeout <int 0-255>]
[<ipaddr>| ipv6address <ipv6addr>] protocol radius {port <int 1-65535> | key
[<string 254> | none] | timeout <int 1-255> | retransmit <int 1-255>}
[<ipaddr> | ipv6address <ipv6addr>] protocol radius {port <int 1-65535> | key
[<string 254> | none] | timeout <int 1-255> | retransmit <int 1-255>}
[<ipaddr> | ipv6address <ipv6addr>] protocol radius
<string 15>
213
34