DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
To define the MLD snooping mrouter forbidden:
show mld snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the MLD snooping:
show mld_snooping forwarding
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the MLD snooping forwarding:
123
DGS3100# config mld_snooping mrouter_port_forbidden default add all
Success.
DGS3100#
To display mld snooping settings on the Switch.
show mld snooping {vlan <vlan_name 32>}
The show mld snooping command displays a port from being
defined as a multicast router port by static configuration or by
automatic learning.
vlan_name 32 – Specifies that the mld snooping applies only to this
previously created VLAN..
Only administrator or operator–level users can issue this command
Separate non–consecutive Ethernet ports with a comma and no
spaces; use a hyphen to designate a range of ports. These ports are
defined as connected to a multicast router.
DGS3100# show mld_snooping
MLD Snooping Global State : Disabled
Multicast Filtering
Vlan Name
Host Timeout
Done Timer
Route Timeout
State
: Disabled
DGS3100#
To display mld snooping settings on the Switch.
show mld_snooping forwarding {vlan <vlan_name 32>}
The show mld_snooping forwarding command displays the
current MLD snooping forwarding table entries currently configured
on the Switch.
vlan_name 32 – Specifies that the mld snooping applies only to this
previously created VLAN.
Only administrator or operator-level users can issue this command.
: Enabled
: default
: 260
: 10
: 300