Error Disable Settings - D-Link DGS-1510 Series Web Ui Reference Manual

Gigabit ethernet smartpro switch

Hide thumbs Also See for DGS-1510 Series:

Table of Contents

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide

The fields that can be configured are described below:

Error Disable Settings

This window is used to configure the sending of SNMP notifications for error disable state.

To view the following window, click System > Port Configuration > Error Disable Settings, as shown

Figure 3-6 Port Auto Negotiation window

Select the switch unit that will be used for this configuration here.

Figure 3-7 Error Disable Settings window