CLI Command Reference
mode (AP Config Mode)
This command configures the managed mode for an AP.
Default
Format
Mode
ws-managed
standalone
ack-rogue
location
This command configures a descriptive string for the AP location.
Format
Mode
value
no location
The
version of this command deletes the current location string for the AP.
no
Format
Mode
password (AP Config Mode)
This command configures the password that this AP must use to authenticate to the Unified
Switch. The password is only verified if global AP authentication is enabled. After you enter
the password, the CLI prompts you to enter a password that is between 8-63 alphanumeric
characters.
Default
Format
Mode
no password
The
version of this command deletes the password for the AP.
no
Format
156
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
ws-managed
mode {ws-managed | standalone | ack-rogue}
AP Config
AP is managed by the Unified Switch upon discovery.
AP is managed as a standalone AP and should not be reported as rogue by the
Unified Switch.
AP is known on the network and should not be reported as rogue by the Uni-
fied Switch.
location <value>
AP Config
This parameter is an AP location string. It should not be more than 32 charac-
ters long. To use spaces in the location, enclose the value with quotes, for
example "Conference Room A."
no location
AP Config
The default password is blank.
password
AP Config
no password