Configuration File Backup/Restore; Upload Log File - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Firmware Upgrade are described below:
Parameter
TFTP Server IP
Path \ Filename
Click the Download button to update the firmware.
To specify a certain switch for firmware download, tick its corresponding check box.

Configuration File Backup/Restore

This window is used to view and upgrade configuration files from the Commander Switch to the Member
Switch using a TFTP server. Member Switches will be listed in the table.
To view the following window, click Management > Virtual Stacking (SIM) > Configuration File
Backup/Restore, as shown below:
The fields that can be configured in Configuration File Backup/Restore are described below:
Parameter
TFTP Server IP
Path \ Filename
Click the Restore button to update the configuration from a TFTP server to the member switch.
Click the Backup button to back up the configuration file to a TFTP server.

Upload Log File

This window is used to view and upload log files from SIM member switches to a specified PC.
To view the following window, click Management > Virtual Stacking (SIM) > Upload Log File, as shown
below:
Figure 4-78 Firmware Upgrade Window
Description
Enter the TFTP server IP address.
Enter the path and file name.
Figure 4-79 Configuration File Backup/Restore Window
Description
Enter the TFTP server IP address.
Enter the path and file name.
87