Show Snmp - D-Link xStack DWS-3200 Series Cli Manual

show snmp

The show snmp Privileged EXEC mode command displays the SNMP status.
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP communications status.
Console# show snmp
Community- Community-
String Access
---------- ----------
public read only
private read write
private su
Community-string
----------------
public
Traps are enabled.
Authentication trap is enabled.
View name IP
address
--------- --------
user-view All
Default 172.16.1.1
DefaultSuper 172.17.1.1
Group name IP address
---------- ----------
user-group all
Page 292
SNMP Commands
show snmp
Type