Setting The Speed - Sirona teneo Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions (USA) TENEO
65 48 510 D3509
D3509.201.03.03.23 10.2016

Setting the speed

4.5.10.2
Simple/Advanced Start program
In the
the static quick setting keys (with the key values 0.09, 10, 20, 30, 40), with
programmable quick setting keys (with changeable key values) or via
function levels (E1, E2).
EasyMode Start program
In the
quick setting keys. They are displayed with values for the intensity levels
(1%, 25%, 50%, 75%, 100%).
Selecting the speed with the quick setting keys
✔
The electric motor is removed from its holder.
✔
Either the
keys is displayed on the touchscreen or the
➢ Touch one of the quick setting keys in the bottom line briefly (< 1 s).
 The quick setting key is highlighted orange. The selected speed
is displayed in the first line in rpm (revolutions per minute).
IMPORTANT
Electric motor, rpm values of quick setting keys
Rpm values of quick setting keys
Simple/Advanced Start program
In the
the motor corresponds to the speed value of the key x 1,000.
Key values with static quick setting keys:
The 0.09 key = 90 rpm (for BL, BL ISO C and BL Implant motors)
The 10 key = 10,000 rpm
The 20 key = 20,000 rpm
The 30 key = 30,000 rpm
The 40 key = 40,000 rpm
The keys values may have been changed with programmable quick
setting keys.
EasyMode Start program
In the
corresponds to the intensity value of the key in percent (except for key
1).
The 1 key = 90 rpm
The 25 key = 10,000 rpm
The 50 key = 20,000 rpm
The 75 key = 30,000 rpm
The 100 key = 40,000 rpm
Please note that the speed of the burr depends on the selected straight
or contra-angle handpiece.
mode settings can be made using
, the speed can only be set using the static
Motor program
with static or programmable quick setting
operating mode, the speed of the motor
4 Operation
4.5 Dentist element
EasyMode Start program
operating modes, the speed of
.
105